Aspire VV has a carbon fiber coated tube that not only gives it a stylish appearance but makes it lighter and more durable than its stainless steel counterparts. You can choose from black, gray, red and blue colors.
At the bottom of this pen-shaped battery is a rotating dial that lets you select optimal voltage output with a soft flick of the knob. You’ll be able to customize voltage from as low as 3.3 volts to as high as 4.8 volts – allowing you to experiment with a variety of atomizer resistances.
The LED indicator can help you approximate the voltage setting of the battery. If it glows orange, the battery voltage is less than 3.5 volts. If it glows blue, the voltage is set between 3.5 volts and 4.2 volts.
The Aspire CF VV features a revolutionary spring connector and stainless steel endpoints that ensure a strong and tight connection between the battery and tank all the time, whether you are using an eGo or 510 threaded cartomizer, clearomizer, or glassomizer.
The Aspire CF variable voltage vaporizer is designed with all the safety features you need to vape at ease, including low voltage protection, overcharge protection, over-discharge protection, atomizer short circuit protection, charging short circuit protection, and lock/unlock modes.
- Carbon fiber coated tube
- Stainless steel endpoints
- Prominent metal firing button
- Rotary knob for adjusting voltage
- Unique spring connector to ensure a strong connection between battery and tank
- Sufficient air holes
- Overcharge protection
- Short circuit protection
- Safety cutoff/atomizer protection
- Low voltage protection
- Threading: eGo and 510 compatible
- Variable output voltage: 3.3V to 4.8V
- Charging input voltage: 4.2V / 420mA
- Available in black, gray, blue and red colors
Aspire CF VV 1600 mAh: 17.4 x 120mm
How to Use Your Aspire CF VV Vaporizer
To activate your Aspire CF VV battery, press the button 5 times within 2 seconds. Both orange and blue LEDs will flash 3 times to confirm activation and the button will stay blue to indicate standby mode. Repeat this procedure to turn the battery off.
While the button is pressed, take a deep puff. The LED light will glow blue if the voltage output is between 3.5 volts and 4.2 volts. It will glow orange if the voltage is less than 3.5 volts.
Rotate the bottom dial to choose the right voltage output for your vaping needs. Voltage can be adjusted in 0.1 volt increments from 3.3 volts to 4.8 volts.
If the LED flashes orange for 15 times, it is time to charge the battery. It takes 2-5 hours for your Aspire CF VV+ to fully recharge.
To charge your battery, remove all vaping components. Gently screw the Aspire CF into the USB charger. Plug the USB into the supplied wall adapter or computer USB port. The LED on the USB charger will glow red when the battery is charging and turn green when the battery is fully charged.
When the battery is charged beyond 4.25 volts, the built-in microchip will shut down the device. When the battery voltage drops below 3.2 volts, the atomizer will remain off and the orange LED will flash 15 times.
If the heating coils experience a short circuit while vaping, the orange and blue LED lights will flash 3 times and the battery will default to sleep mode.
If a short circuit happens during charging, the LED lights will flash 6 times and the battery will default to “off” position and stop charging.
Always charge the Aspire CF battery completely before using.
Do not store the CF battery in a hot or humid environment.
Do not drop or puncture the CF battery.
Do not force any other attachments into the CF battery terminal.
Charge the CF battery only on compatible chargers supplied by Aspire.
Always keep the CF battery dry and away from moisture.
Do not dismantle or expose the battery compartment.
If the indicator light stays on continuously or the battery becomes too hot, immediately disconnect the battery from the cartridge to break the electrical connection.
1 x Aspire CF VV battery (mAh selected at checkout)